Skip to main content
Lubbock Plumbing Experts

Local conditions · Lubbock, TX

Hard Water in Lubbock: What the City’s Numbers Say

The City of Lubbock’s 2025 water quality report lists water hardness averaging 169 ppm (range 81 to 244), which falls in the band the U.S. Geological Survey calls hard if it is measured as calcium carbonate. Here is what that means for water heaters, fixtures and softeners.

Published November 18, 2026 · Figures and rules checked against the sources listed at the end of this page.

The numbers from the City's 2025 report

City of Lubbock 2025 water quality report, "Additional Monitoring" (not regulated)
MeasureAverageRange
Hardness169 ppm81 to 244 ppm
Calcium30 ppm18 to 42 ppm
Magnesium23 ppm9 to 24 ppm
Total dissolved solids633 ppm321 to 991 ppm (Texas secondary level: 1,000)
Total alkalinity197.49 ppm182.60 to 206.39 ppm

Source: City of Lubbock, 2025 Water Quality Report (Consumer Confidence Report, Lubbock Public Water System, PWS ID TX1520002, calendar year 2025), read 2026-11-18. The report lists these measures as "Not Regulated".

How hard is that?

The U.S. Geological Survey's general guide, in milligrams per liter as calcium carbonate: 0 to 60 is soft, 61 to 120 moderately hard, 121 to 180 hard, and more than 180 very hard. Parts per million and milligrams per liter are effectively the same for water. Lubbock's 169 average sits in the hard band, and the top of its range is very hard, on the assumption that the City reports hardness as calcium carbonate; its report does not say.

Why it varies

Lubbock blends sources. In 2025 about 61% of the City's water was groundwater from the Ogallala Aquifer (the Roberts County Well Field supplied 46% and the Bailey County Well Field 15%), and 39% was surface water from Lake Alan Henry (23%) and Lake Meredith (16%). The report gives hardness for the system as a whole, so the reading at a particular tap can differ from the average.

What hard water does in a house

  • Water heaters: minerals settle as sediment in a tank (the popping sound) and build scale inside a tankless heat exchanger, which is why flushing and descaling are routine.
  • Fixtures: white crust on faucets and shower heads, spotty glasses, slower flow through aerators.
  • Appliances: scale in dishwashers, washers and ice makers.

What the fixes cost

Scale-related work (national, 2026)
JobNational range
Flush and clean a tank water heater $75 to $250
Flush and descale a tankless water heater $75 to $300
Anode rod replacement $150 to $350
Water softener installed $800 to $3,000
Water treatment or purification system installed $750 to $2,675

Source: HomeGuide, "How Much Does Water Heater Repair Cost? (2026)", read 2026-11-18; HomeGuide, "2026 Plumber Cost Per Hour | Average Rates To Hire A Plumber", read 2026-11-18 (page byline dated September 25, 2023). National contractor prices, not a Lubbock price list; no Lubbock company's prices were read.

Want a real number for your house?

A plumber can tell you whether your heater needs a flush, a descale or a new anode, and price each in writing. Quote requests open soon.

Get matched with a plumber

Softener or no softener?

A softener is a convenience choice. It cuts scale on fixtures and inside the water heater; the trade-offs are the purchase and installation price, salt and upkeep. Under Texas law, water treatment installations, exchanges, services and repairs (other than treating rainwater) are exempt from the plumbing license chapter, so ask whoever installs one what license or registration they hold and who connects it to your plumbing. If you are on a private well, test the well water first; the City's report covers the City system only.

The City's water quality contact for questions about the report: Water Superintendent of Water Treatment, 806-775-2616.

Related: Lubbock plumbing costs · check a Texas plumbing license.

Next step

Hard water shows up first in the water heater: sediment in a tank, scale in a tankless unit. The water heater guide covers flushing, repairs and replacement.

Sources and dates

Every figure and rule above names where it came from and the date it was read. A written quote for a specific house can differ from these ranges; ask the plumber to explain any difference. Prices are rechecked at least every six months.

  1. City of Lubbock, 2025 Water Quality Report (Consumer Confidence Report, Lubbock Public Water System, PWS ID TX1520002, calendar year 2025) — read November 18, 2026
  2. U.S. Geological Survey, Water Science School, "Hardness of Water" — read November 18, 2026
  3. HomeGuide, "2026 Plumber Cost Per Hour | Average Rates To Hire A Plumber" — read November 18, 2026. National ranges; the page byline is dated September 25, 2023.
  4. HomeGuide, "How Much Does Water Heater Repair Cost? (2026)" — read November 18, 2026. National ranges.
  5. Texas Occupations Code, Chapter 1301, section 1301.053(a)(5) — read November 18, 2026

Lubbock water questions

How hard is Lubbock’s water?

The City of Lubbock’s 2025 water quality report lists hardness averaging 169 ppm, with a range of 81 to 244. The U.S. Geological Survey classes 121 to 180 milligrams per liter, measured as calcium carbonate, as hard and anything above 180 as very hard. The City’s report does not say whether its figure is measured as calcium carbonate.

Where does Lubbock’s water come from?

According to the City’s 2025 report, about 61% is groundwater from the Ogallala Aquifer, pumped from the Roberts County and Bailey County well fields, and 39% is surface water from Lake Alan Henry and Lake Meredith.

Do I need a water softener in Lubbock?

It is a choice, not a requirement. A softener reduces scale on fixtures and inside water heaters; it also adds cost ($800 to $3,000 installed nationally, per HomeGuide) and upkeep. If you are on a private well rather than City water, have the well water tested first; the City report only covers the City system.